![Better Bumpers XL (custom sized and priced per inch)](http://onestopsimshop.com/cdn/shop/products/Better-Bumpers-Corner-1_ee90be9c-570d-428c-b5e1-509c433da269_{width}x.jpg?v=1641835244)
These are the same great bumpers but in an XL size. 5”x8" with an 9.4” diagonal.
Simply the best solution to cover the gap between the impact screen and the frame! The triangular shape assists to ricochet the ball towards the screen and away from the frame and bungee gap.
When sized appropriately, Better Bumpers should cover the frame, bungees, and grommets around the perimeter of the screen and once installed, it picture frames the screen perfectly.
Specifications:
Dimensions: 5” deep (side) x 8" (backside, against the screen) x 9.4” (hypotenuse) x whatever custom length you desire (order the next length up from your inside spec dimensions and add notes to the exact dimensions required).
Wrapped in an adhesive backed solution dyed no bleed impact resistant fabric. This fabric is unique in that it acts as the loop side of velcro and will adhere to any brand of hook side velcro/hook and loop tape.
The color of the fabric is black.
Available with square or mitered corners or a combination thereof.
To install simply attach adhesive back hook velcro strips (provided) to your tarp clips to secure in place. You can also attach by sliding a piece of hook velcro through your bungees vertically and horizontally. For those with strut channel frames apply adhesive backed velcro to the frame and the bumper will easily mount to the frame.
To order: The back of the bumper that butts up against the screen is approximately 8". Since most screens have a 2" border around the perimeter, 2" of the 8" is designed to cover the border. The other 6" covers the bungees and the frame.
If you want bumpers with miters on both ends you would typically order 12" longer than the outside width dimension of your screen.
If you want a top or bottom bumper without miters (squared on both ends), you would typically order the width of your screen plus 12".
If you want side bumpers, mitered on top and square on the bottom, you would usually order the same length as the distance between the top of your screen and the top of the floor turf, plus 4".
Please note these are shipped rolled up and slight wrinkling can occur. Most relax out after the foam expands back to its original shape but some may remain. Bumpers, panels, and baffles are made with a unique fabric that has a very light nap, which, under certain lighting conditions can vary in color.
Ship times shown at checkout are estimates of time in transit after your product has shipped. Please note this item has a lead time of 2-4 weeks, which is not shown in the estimate. Some items in your order may ship separately to arrive faster.
**It is recommended that golfers be a minimum of 10 feet away from the screen. Standing closer to the screen increases the risk of ricochets, especially on low-line drives and rolled shots. Bumper ramps are available to further decrease ricochets. One Stop Sim Shop disclaims liability for any damage, mishap, or injury that may occur from ricocheted golf balls.**
All Better Bumpers regardless of size are completely custom made by One Stop Sim Shop and are therefore not returnable or eligible for a refund. Please confirm your specifications before completing your purchase.